The Handyguys answers some questions and then discuss Garbage Disposals

First of all, please watch our videos from Episode #52 and  take our survey.  We would love some  more feedback!

A garbage disposal is something most of us have but the troubleshooting  instructions are probably missing..  The Handyguys discuss ways to fix these little beasts when they are no cooperating.  But first… the Handyguys answer some listener questions.

Hammer Drill Chuck Problems

Nathan writes to Handyguy Paul:

Paul, I had a question about the Makita HP1621FK that you bought for finishing your basement.  Did you ever have problems with drill bits spinning inside the chuck?  It seems with these keyless chuck drills I can never get the chuck tight enough to stop bits from spinning when drilling into hard objects such as concrete.  Do you guys have any tips for possibly reducing this problem in these keyless chuck drills? – Nathan

Thanks for he question Nathan.  Indeed Paul did experience this problem with this particular drill.  His solution was to hold the chuck tight while he ran the drill slowly to get the chuck good and tight.  He also pushed in the bit as far as he could — in some cases all the way to the base of the chuck — so that the bit would not slip.

Paul typically had a different problem with this drill, namely, removing the bit after using it to drill into concrete.  Listen to the podcast for more details and solutions.  This is a great drill for the price so hopefully we can get this issue resolved.

This isn't Larry. We're not sure this guy is going to get his mower started like this!

Reviving an Unused Lawnmower

The Handyguys also received a call-in question from Larry who is trying to save money in this down economy and wants to begin mowing his lawn himself.  Unfortunately, his lawnmower has been sitting unused for a few years and he wants to get it working again.  The Handyguys provide some tips in the podcast and also refer Larry to our show from last spring on prepping your mower for the mowing season.

That brings us to the big issue at hand…

Garbage Disposal Problems

Picture thanks to http://www.flickr.com/photos/mike-burns/8907417/

A garbage disposal is an appliance that most of us have and yet it is still a mystery to most.  The garbage disposal is a great tool and when it works you don’t give it a second thought.  However, if you experience problems with clogs or poor performance, there is no set of troubleshooting tips printed under your sink.  The Handyguys discuss some methods for treating the typical problems you can experience with a disposal. Listen to the podcast for details.

The Handyguys then have a discussion about the best way to clean our disposal.

Check out the podcast for details and get your disposal unclogged!