In this video The Handyguys discuss installing a wall sconce to add ambiance lighting, that wont glare on the screen, to a basement home theater.

Glare is the issue, planning is the answer

When you are considering lighting for your home, whether it be for a home theater, television viewing area, home office, kitchen or other places, it is important to consider placement of lighting so it will not cause glare. When Brian finished his basement he included a home theater. (It’s really not that grand, more a movie watching area) The lighting Brian originally installed were some recessed can lights. Once the wide-screen TV was acquired, the surround sound set-up and the furniture placement finalized, it became apparent that light from the recessed cans would cause glare on the TV screen.

The solution became to install some wall sconces. Brian was lucky to find Rejuvenation Lighting out of Portland, OR. Rejuvenation has a large selection of wall sconces. Even better, they had lights that had an old-time movie theater look.

Installation

We wont cover fishing wire in this video, that will be sometime later this year maybe.

1. Locate box location, trace fixture box, cut hole for box
2. Shut off power
3. Test that the power is off
4. Pull wires into hole and then into box – half inch of the Romex sheath should be inside the box
5. Install box in cutout
6. Connect fixture wires to house wiring – white to white, black to black, ground to ground. If your fixture doesn’t have a ground wire, the Romex ground should be connected to the fixture bar ground screw.
7. Mount the fixture according to the directions that came with it

That’s it, in a nutshell, if you have any questions about installing a light or any other questions for The Handyguys feel free to contact us.

The Handyguys discuss doing a tile back-splash.

Preparations

You need to make sure your wall is smooth and clean. Measure and decide what areas of your back-splash you want to cover. When buying tile make sure you account for waste and bad cuts.

Layout

Decide on your layout. If you go horizontal you will have significantly fewer cuts. If you have a complicated pattern you should lay out each piece of tile on the floor so you can see how it will go on the wall.

Tile options

Decorative tiles can add a nice look to your project but can really add to the cost. When selecting a tile ensure that any bull-nose, inside corners, outside corners, etc are available. Some patterns and layouts wont need the pieces. They can add significantly to your budget depending on your tile choices.

Tools and Materials

Handyguy Paul set up an area in his garage to cut the tiles. He borrowed the saw. The plastic curtain kepts the mess contained.

Handyguy Paul found all the tools he needed at the local True Value. First decide on mastic or thinset. The Handyguys discuss the pros and cons of each choice and what applications are best for each.  You will need a trowel, a grout float, a tile saw (rent, borrow or buy one), spacers, grout, caulk, a bucket and a large sponge.

Application Techniques

Paul wraps up the show with some tips and encouragement for anyone considering doing a tile back-splash.

Looks great! Still needs grouting in this picture but the whole project turned out nicely. The design committee aproved.

Thanks

The Handyguys would like to Thank True Value for sponsoring several segments of The Handyguys Podcast over the past few months. Its supporters like True Value that make it possible for us to stay on the air.

Disclosure

How do you get your house ready for the Winter Season?

Win this toolkit. Click on the picture to learn how! Hint: valid use of duct tape wins!

Join the Handyguys in a not-so-methodical checklist for the winter season.  This is not your every day handyman (or not so handyperson) checklist.  We have some extras you may not see on other lists. Listen to the podcast as we discuss these items. True Value had all the supplies we needed to get our houses in order.

• As the days get shorter and darker, it is a good time to check all of your outdoor lights.  Make sure they work.
  

  Paul was able to discover these fancy CFLs at our local True Value. They look great don’t you think?

  Perhaps it is time to install a light with a motion detector to secure your outdoor entrances and windows.

• Also, you can now get some wife pleasing outdoor CFL lights.  You don’t have to settle on the curly cue CFL bulbs

• Watch out for leaks and/or water penetration.
  • gutters/downspouts
  • grade flowing toward house
  • clear insulation around soffit vents to avoid ice dams
• Bring in your outdoor furniture
• Replace the grates and flavor bars on your Grill.  True Value has the parts you need for this.
  

  Why not refresh your busted down grill and enjoy a few more cookouts this season. Paul picked up the new flavor bars and grate at True Value. The steaks came from the cow he bought.

• Winterize your yard tools
• Seal/weatherstrip and caulk around window and doors and latch those windows for the winter
• Insulate your unfinished basement.. especially around the rim joist
• Clean your Dryer Vent before it is too cold to work outside
• Install some heavy drapes on your windows to stop drafts.  That’ s what they did in the old days.
• Last chance for pre-winter fertilizer.
• Final chance for exterior touch up paint
• Is it time to stain the Deck in the fall?  Isn’t the sun closer to earth in the Winter?  Brian says no.  Paul says yes. Which is it?

Disclosure

The Handyguys answer a basement remodeling question and then list some basement mistakes.

Don't finish this basement! Photo courtesy of http://www.flickr.com/photos/goodnight_photography/

The basement finishing topic is popular among handy folks around the home. Many handyguys across America and the world have basements that they want to remodel to create new livable space. Basements are no longer scary, dungy places but can become vital living spaces to your home. But before you you begin finishing your basement, listen to our basement series and then listen to this episode about mistakes that “some” handyguys make when working on their basement.

But before we get to Brian and Paul’s list of basement mistakes, the Handyguys address a question from Mike regarding his basement:

Hey guys,

I have recently found your show and appreciate your knowledge and help. I figured as a new homeowner who likes to constantly improve his house, I would try to get you opinion on a project I am thinking of taking on during the cold season here in New England.

We are thinking of finishing a portion of our basement for a rec/bar room. After doing some research about how to refinish I have read about the traditional way of framing walls, using rolled insulation and drywall. There is another method of using furring strips attached directly to the foundation and foam board for insulation. I was wondering if you had comments on either method or why I would want to stay away from either method.

Between the two I had been planning on framing everything out, however the simplicity and lower costs of furring strips is attractive. This does come with some disadvantages (attaching directly to the foundation).

With building frames I would have to rerun the forced water baseboards, which is a little more complicated.

Overall my basement is very dry, there is one crack, and it is sealed with epoxy injection. The house is almost eight years old and already has cables and outlets run.Thanks for the help if you get to me!

 

The Handyguys are not thrilled about the furring strip technique. Sure you might save some time and money with this technique, but there are many drawbacks. We emailed Mike some suggestions.  Listen to the podcast for details.

12 Common Basement Design Mistakes

The Handyguys spend some time listing out key basement design mistakes. In this segment, Paul and Brian each prepare their own list independently without telling one another and then reveal their items live on the show. Here is a summary of the Handyguys basement finishing/remodeling mistakes. Please listen to the podcast for more details (and to see who comes up with more mistakes!).

1. You begin finishing a basement that is not a good candidate for finishing…. C heck out our episode #17 – “Is Your Basement Ready?” to help you determine whether your basement is ready.
2. Poor Capacity sizing and planning for utilities (HVAC and electric).
3. Assuming that drop or suspension ceilings are cheaper then a finished drywall ceiling.
4. Overestimating your skill limit.
5. Underestimating Costs.
6. Bad lighting switch locations.
7. Poor insulation and/or insulation techniques
8. Poor planning of low voltage wiring locations.
9. Trying to do it all yourself (i.e. not subbing out some aspects of the job as necessary).
10. Improper planning of combustion air availability for utilities.
11. Not using pressure treated wood for bottom plates and anywhere wood is in contact with concrete.
12. Chopping up basement space into many small rooms which can create an awkward flow and unused space.

Do you have some better ideas of basement mistakes in basement design? Let us know if you do.

This post is a new addition to our basement finishing series.

Part 4 in the Basement Finishing Series

The Handyguys are becoming the “Basementguys” in this new fourth installment of the basement series.  The Handyguys discuss basement materials and revisit some old advice they gave about mowing lawns.

First up… a discussion about some advice that Handyguys gave in Episode #15 on lawn care.  Is it true what one of the Handyguys said regarding your mower height?  Handyguy Paul said that if you mow the lawn lower, the grass will grow faster in order to get more sun and generate more food for the roots.  It sounded too good to be true so he sought out to prove his own advice.  Paul performed a little experiment on his backyard.  We could show you a picture here but Paul was a little embarrassed.  He cut a 30 foot swath down the middle of his back yard an inch shorter then the outside edges of his yard.  He wanted to see if it would grow any faster then the rest of the yard.  What was the result?  You will have to listen to the Podcast and see if the Handyguys offered good advice or bad advice.

The Handyguys then discuss the many choices that you have in regard to basement materials.  You want to finish your basement but what materials will you choose? Should you use steel studs or wood?  What about the pre-fabricated basement systems?  Drop ceilings or sheet rock?

The Handyguys also discuss sound blocking options.

Photo © 2008 Bungalow Chronicles

Good design will help your basement blend in with the rest of your house and not feel like a cheap addition. Planning and good material choices with a good decorating sense will go a long way.

Material talk and more discussions about your basement on episode #19 of the Handyguys Podcast.

Thanks for Listening

The Handyguys help you determine whether your unfinished basement is suitable for finishing in their home improvement podcast.

Part 2 in the basement finishing series.

Are you tired of that dirty old basement which is filled with all of the junk that you don’t need? Have you been waiting to use that pneumatic nailer you recently purchased? Then it is time to begin finishing your basement. But before you shoot your first nail, you have to determine if your basement is a good candidate to be converted to living space. You don’t want to spend a lot of time and money finishing your basement if water, mold and moisture are going to ruin your hard work.

The Handyguys take a look at some of the hurdles you must face before even thinking of finishing your basement. They provide some tips for the do-it-yourself minded individuals who would love to see a nice play room, entertainment room or billiards room in your basement.

Do you have enough electrical power to handle the new space you want to finish? If not, you may need to upgrade your service. Consider talking to an electrical professional to evaluate your current electrical service and panel.

In addition, you must have adequate heating and a/c for the new space.

The common problem you must correct before beginning finishing work is to mitigate against any kind of water or moisture penetration. You don’t want that new Berber carpet to become moldy or soaked from a freak rainstorm. You should have a good water mitigation plan in place handle the threats that nature brings. If you have severe water problems, you may want to talk to a few local water mitigation contractors to see what products they offer to prevent water penetration. If you decide to have a drainage system installed, be sure to wait a couple of years to confirm that it stand up to all kinds of weather. You don’t want to discover that your new system fails during that huge thunderstorm when the power goes out.

Another common problem is Radon. This natural gas is not something you want trapped in your home. There are reasonably priced systems available to prevent radon gas from seeping into your home but you want to deal with this issue before you begin finishing the basement. It will make your life a lot easier.

In addition to problems from the outside, there are potential problems already in your basement.

Is your stairwell adequate?

Is your ceiling height high enough for finished space? Are utilities and ductwork going to be in the way?

Check out this week’s podcast for more details.

Part one of the Basement Series can be read and listened to here.

The Handyguys discuss how to evaluate home improvement ideas and whether finishing your basement is a job for the DIYer. They also discuss a new site for finding and reviewing contractors.

Episode #1 in the Basement Finishing Series

There are many projects to do around the house but sometimes the handy guy can bite off more then he (or she) can chew. The Handyguys discuss the basic issues to consider when determining whether a new projected should be contracted out or performed yourself.

Some of the topics discussed include:

• How Long will it take?
  • weeks, months, years to never finish
• How much will it cost?
  • A little to a lot
• When to bring in a subcontractor
• DIY satisfaction
• Do you have the right tools and skills?

Even if you have the ability to do the job, there are a lot of issues to consider before doing it yourself. In addition to carpentry skills, you need time, patience, lots of tools and a good back to finish your basement. If you are lacking in any of these categories, you may want to consider hiring a contractor for the job.

The Handyguys then discuss an article from remodelingmagazine.com. Its their annual cost vs. value report. Some of the data is excerpted below.

The Handyguys then discuss how to find a good contractor. Turn to your neighbors was Paul’s suggestion. But what if you do not have a neighbor or friend who has had their basement finished? What then?It was agreed that just hitting the yellow pages may not be a good route. You need some good, objective advice. You can get that advice at www.homestars.com.

This website is designed to help you review and research contractors that are in your local area. Check it out… it may save you a lot hassle in the future. Check it out!

Lastly – So, you are going to go through with it or you have already finished your basement.  The Handyguys will be continuing to talk about finishing your basement over the next few weeks. If you have finished your basement yourself and would like to chat with the Handyguys on the air about your experience just let us know. If you are in the middle of a project and would like to dialog on the air about where you are in the process we would be open to that as well. email us@handyguyspodcast.com or use the contact tab on the website.