The Handyguys received a distraught email from one of our listeners regarding a DIY disaster. It seems that Leroy has the challenge of fixing a hack job from the previous homeowner.

Hi guys, I recently purchased a house. The home was built in 1990. In the master bedroom there is an 8 inch paper boarder up high on the walls. Instead of taking the boarder off, the person who lived here prior apparently used some sort of mud to (poorly) blend the lower portion of the boarder to the rest of the sheet rock then used what looks like spray texture to try and match the knockdown texture currently on the wall and then painted the entire room. At a distance you can kinda see the patchwork but up close it is very unattractive. My question is how would you go about removing the boarder and making the wall look uniform being that there is knockdown texture on the wall. Thank you so much. Love the podcast and fyi I wrote a review on Itunes.

The Handyguys make an effort to rescue Leroy from this potential mess. In summary, there are three choices that the handyguy can make to fix the funny looking walls:

1. Just tear down that drywall and install new! Obviously this is a drastic solution but it would work.
2. Try to create a texture over the wallpaper boarder that matches the rest of the wall. The Handyguys discuss the texture options.
3. Camouflage the problem. Either use another wallpaper border that is thicker then the one used previously or repaint the room with a faux paint process that hides the problem.

Water Pressure in the Home

Is your home water pressure to high? Many newer homes have pressure regulators which reduce the water pressure coming into the home. However, if these regulators are not set correctly or are faulty, you could have high water pressure which may cause a plumbing disaster. A typical home water pressure is measured at 70psi or below.

You can use this affordable pressure gauge available in our store. The Handyguys discuss how to use it in the podcast.

However, Handyguy Paul has heard from Neighbors with readings above 100psi. This high pressure can raise the chance of having a plumbing failure, particularly with one of the many fittings to toilets and sinks. If you think you may have high water pressure, get it checked.

If you want to check your water pressure yourself you may want to consider picking up a water pressure gauge. They are not too expensive and could save you some trouble by identifying if your pressure is too high before it causes a problem.

Channel Lock

Channellock sent us their newly released tool: the 6.5″ V-Jaw tongue and groove pliers to check out. They look useful and more versatile than regular pliers. The Handyguys discuss some possible uses, keep them handy and report back when we use them on a future project. We love that they are made in the USA! Thanks Channellock. You can get Channellock Products at Amazon by clicking this link

Related shows:

1. Exploding Water Heaters And Home Networking
2. Repair a leaking water heater T&P and planning for a new deck
3. How To Cut Metal, CFL Safety And Water Saving Flush Valves