The Handyguys begin their show discussing some new green lawn tools. Their conversation was prompted by an article in the Wall Street Journal regarding some new “green” lawn tools written by Gwendolyn (Wendy) Bounds. She even tested out a new battery operated riding mower. Her video is a must view if you are considering one of these.

Certificate of Use Requirements

The Handyguys then discuss the topic of “Certificate of Use”. What’s that? In many townships across the country they are requiring certain safety items to be present in a home before a sale can proceed. Sometimes the upgrades can be difficult, expensive or just a pain.

The Handyguys discuss many of the common elements in a Certificate of Use inspection. This inspection is not to be confused with a code inspection that may be required during a major remodel. Below is some language from a typical requirements document from a local township.

Minimum Life Safety Requirements

1. Ground Fault Circuit Interrupter (G.F.C.I’s) receptacles are required for receptacles located in bathrooms, powder rooms, garages, outside receptacles, vicinity of pools, saunas etc. and in kitchens where the receptacles are within six (6) feet of the waters edge of the sink. A receptacle with a single yolk that is dedicated for an appliance need not have a GFCI installed.
2. Smoke detectors are to be installed, in working order, in each bedroom, in the vicinity of the bedrooms and each floor of the dwelling including basements. In a split-level dwelling without an intervening door between adjacent levels, smoke detectors are required in the vicinity of the bedrooms and the lower level that is one story below the upper level. If an intervening door exists between adjacent levels, a smoke detector shall be installed on each level.
3. At least one operable carbon monoxide detector shall be installed in the hallway in the vicinity of the bedroom area of the dwelling.
4. For dwellings equipped with a fire suppression or sprinkler system, the applicant shall provide documentation that the system has been inspected and certified within the past 12 months by a certified inspection agency.
5. Sidewalks, driveway aprons and curbs must be in good condition. Out of level, fragmented or otherwise deteriorated sidewalks, driveway aprons and curbs must be removed and replaced. Patching shall not be permitted.
6. House numbers must be affixed on the outside of the dwelling so that they are visible from the street. The house numbers must be three and one half (3 ½) inches in height.

Sanitary Sewer Infiltration Prevention

1. Sump pumps and floor drains are to be discharged to the exterior of the dwelling. Sump pumps and floor drains connected to the sanitary sewer are illegal and must be corrected.
2. Roof drains and yard drains shall not be connected to the sanitary sewer.
3. The sewer lateral curb trap vent pipe must be six (6) inches above grade and have a secure vent cap or box. If the curb trap vent pipe is not exposed, the vent pipe must be located, raised and installed with a Philadelphia Regulation vent box. In the event that t curb trap vent cannot be located, the applicant shall obtain a registered plumber to provide documentation that the curb trap vent could not be located.

Related shows:

1. How To Grow A Green Lawn
2. Basement Systems Continued And Paint Removal
3. Avoiding Costly DIY Mistakes

The Handyguys complete their basement finishing series with an interview of a basement refinishing expert Roger German.

Part 2 of 2 of Roger German’s interview, Part 6 of the basement finishing series.

Brian and Paul complete their interview with basement remodeling expert Roger German. Mr. German is the author of Remodeling a Basement from the Taunton Press’ “Build Like a Pro” series of books. This is the second half of our interview.
In part 2 of the interview, Roger discusses the following:

• Basement Extras
• Lighting
• Drop Ceiling vs. sheet rock
• More on water mitigation

Thanks to listening to this interview with Roger German.

This post will conclude our 6 part series on basements. As always if you have any questions about any DIY or home improvement topics feel free to contact us. You may also comment on these posts.

In next weeks episode we will address several listener/reader questions as well as provide plans and give guidance on building and arbor for your garden.

Related shows:

1. Part 1: An Interview With Roger German (The Basement Guy!)
2. Finished Basement Planning And Dealing With Building Codes
3. DIY Basement Finishing – Is My Basement Ready

The Handyguys give an overview of how to plan for your finished basement.

Part 3 in the Basement Finishing Series

Now that your basement is ready to finish, you need to develop a plan to execute that construction job down under. The Handyguys know some creative visionaries can see the complete construction plan in their head and just start driving nails until they have a beautiful basement. However, for the rest of us, we need to write out some basic plans, study the building codes, and determine whether we have enough money to complete the work. That’s right, you are going to need a handful of hard earned cash to get your basement finished well.

But where do you start? First, you should determine if you can afford to finish your basement. The Handyguys tell you how much it will cost per square foot to get the job done. Make sure you can afford the job before you begin making your plans.

Once you have determined that your wallet is up to the task, get out the graph paper or install a design program such as Google Sketch Up to draw out your new basement. The Geeky side of the Handyguys suggests using the computer, but it certainly is not required. The building inspector just needs a drawing that shows your dimension, windows sizes, outlets and other items that the Handyguys discuss on this episode.

What about code issues? What do you need to consider to get those plans right? There is more to consider then just electrical loads, outlet placement, etc. You need to do load calculations on your HVAC system to make sure that it can handle the load of your additional living space. If your central heat cannot take the load, you will want to consider other sources of heat (generally you do not need to cool the basement space as the earth does a sufficient job).

The links below may be helpful for fulfilling your local codes. However, you must determine the codes that are established in your local jurisdiction! That is the only way to be compliant.

Check out the podcast for more information and view these helpful links:

General code checklist

Heat Loss and Gain Worksheet

Related shows:

1. DIY Basement Finishing – Is My Basement Ready
2. Part 2: An Interview With Roger German (The Basement Guy!)
3. Material Choices When Finishing A Basement