The Handyguys May 22nd, 2008

 

 Standard Podcast [27:36m]: Play Now | Play in Popup | Download

The Handyguys give an overview of how to plan for your finished basement.

Part 3 in the Basement Finishing Series

Now that your basement is ready to finish, you need to develop a plan to execute that construction job down under. The Handyguys know some creative visionaries can see the complete construction plan in their head and just start driving nails until they have a beautiful basement. However, for the rest of us, we need to write out some basic plans, study the building codes, and determine whether we have enough money to complete the work. That’s right, you are going to need a handful of hard earned cash to get your basement finished well.

But where do you start? First, you should determine if you can afford to finish your basement. The Handyguys tell you how much it will cost per square foot to get the job done. Make sure you can afford the job before you begin making your plans.

Once you have determined that your wallet is up to the task, get out the graph paper or install a design program such as Google Sketch Up to draw out your new basement. The Geeky side of the Handyguys suggests using the computer, but it certainly is not required. The building inspector just needs a drawing that shows your dimension, windows sizes, outlets and other items that the Handyguys discuss on this episode.

What about code issues? What do you need to consider to get those plans right? There is more to consider then just electrical loads, outlet placement, etc. You need to do load calculations on your HVAC system to make sure that it can handle the load of your additional living space. If your central heat cannot take the load, you will want to consider other sources of heat (generally you do not need to cool the basement space as the earth does a sufficient job).

The links below may be helpful for fulfilling your local codes. However, you must determine the codes that are established in your local jurisdiction! That is the only way to be compliant.

Check out the podcast for more information and view these helpful links:

General code checklist

Heat Loss and Gain Worksheet

• Handyguys Podcast Category
• Comments(0)

The Handyguys May 15th, 2008

 

 Standard Podcast [21:54m]: Play Now | Play in Popup | Download

The Handyguys help you determine whether your unfinished basement is suitable for finishing.

Part 2 in the basement finishing series.

Are you tired of that dirty old basement which is filled with all of the junk that you don’t need? Have you been waiting to use that pneumatic nailer you recently purchased? Then it is time to begin finishing your basement. But before you shoot your first nail, you have to determine if your basement is a good candidate to be converted to living space. You don’t want to spend a lot of time and money finishing your basement if water, mold and moisture are going to ruin your hard work.

The Handyguys take a look at some of the hurdles you must face before even thinking of finishing your basement. They provide some tips for the do-it-yourself minded individuals who would love to see a nice play room, entertainment room or billiards room in your basement.

Do you have enough electrical power to handle the new space you want to finish? If not, you may need to upgrade your service. Consider talking to an electrical professional to evaluate your current electrical service and panel.

In addition, you must have adequate heating and a/c for the new space.

The common problem you must correct before beginning finishing work is to mitigate against any kind of water or moisture penetration. You don’t want that new Berber carpet to become moldy or soaked from a freak rainstorm. You should have a good water mitigation plan in place handle the threats that nature brings. If you have severe water problems, you may want to talk to a few local water mitigation contractors to see what products they offer to prevent water penetration. If you decide to have a drainage system installed, be sure to wait a couple of years to confirm that it stand up to all kinds of weather. You don’t want to discover that your new system fails during that huge thunderstorm when the power goes out.

Another common problem is Radon. This natural gas is not something you want trapped in your home. There are reasonably priced systems available to prevent radon gas from seeping into your home but you want to deal with this issue before you begin finishing the basement. It will make your life a lot easier.

In addition to problems from the outside, there are potential problems already in your basement.

Is your stairwell adequate?

Is your ceiling height high enough for finished space? Are utilities and ductwork going to be in the way?

Check out this week’s podcast for more details.

Part one of the Basement Series can be read and listened to here.

• Handyguys Podcast Category
• Comments(0)